December 2010 Archives

Happy New Year

| No Comments | No TrackBacks
Stoneline Designs would like to wish everyone a happy and prosperous New Year!


happy-new-year-2011-odometer_design.png
We look forward to serving you in 2011 and beyond.

StonelineDesigns, Inc. creates beautiful office furniture using wood, steel, glass and stone. Our stone topped conference tables are very popular for both home and executive offices. Following are descriptions of some of our most popular types of stone, slate and granite.


Absolute Black Granite

Honed or Polished Finish

 

CesCredDetailChGranite.jpg

Absolute Black Granite is one of the most popular materials that Stoneline Designs, Inc. uses for its custom made office furniture. It is a deep Black stone from Zimbabwe with no veining and consistent coloring. It is available in both a honed finish and a highly polished finish. A 1" sandblasted border and edge detail is standard. A very hard and durable stone. The polished finish requires no maintenance while the Honed finish require occasional reapplication of Mineral Oil. Frequency depends on use but approximately once a year for a moderately used dining table.



Benjamin Grey Stone


 

stone-jerusalem.jpg

The Benjamin Grey Stone is a Warm Grey Stone from Jerusalem with soft veining in a sweeping pattern over the whole surface. It has a Honed (satin) finish with a 1" hand-tooled border detail. It is a medium hard stone and scratching can occur. Therefore, coasters and placemats are recommended. Requires periodic reapplication of Mineral Oil. Frequency depends on use but approximately once every 2 years for an occasionally used dining table.



Cleft Black Slate


 

VectorSlateCherryDetail.jpg

Our Cleft Black Slate is a black stone from Italy with consistent coloring. The stone is split (cleft) to provide a rough, textured surface. A 1" hand-tooled border detail is standard. This material is appropriate for infrequently used, formal dining tables or occasional tables (End, Coffee & Console Tables). It is a medium soft stone and scratching can occur. Therefore, coasters and placemats are recommended. It requires periodic reapplication of the final oil finish used in the sealing process. Frequency depends on use, but we recommend approximately once every 2 years for an occasionally used dining table.

Any Stoneline conference table can include a custom power/wiring system. Electronic devices such as computer, projector, or video conferencing equipment can connect to power and data ports cleverly concealed in the conference table top. 

WiringGrommet.jpgStoneline Designs offers many different power/wiring options in all their custom made conference tables including the following:

  • Power/Wiring Grommet.   Electronics plug into two power and two voice/data ports (cat. 5) inside a 4" diameter hole in the table top. The wires and power/data outlets are concealed by a Brushed Aluminum cover cap.
  • Center Power/Wiring Trough.  A sliding Brushed Aluminum cover conceals Power and voice/data ports (cat. 5). Each sliding cover includes 2 power and 2 voice/data ports. Additional wiring and power or data outlets are easily accomodated for greater electronic conferencing needs.
  • Pop-up Power/Wiring Box. (Crescent table only) Four power outlets and four voice/data ports (cat. 5) inside a 5" diameter wiring box which raises up out of the table top, and pops down for concealment. Pop-up wiring box is accessed from both sides of table. Electronics and power cables are run through the pedestal, typically to power outlets in the floor.
  • Flip-up Power/Wiring Box, Side Access. Electronics plug into one power outlet, two voice/data ports (cat. 5), audio port and VGA port inside a 5" diameter wiring box which raises out of the table top, and pops down for concealment. Wiring access from one side of flip-up box only.
  • Pass-through Power/Wiring Hole. An economical alternative, the pass-through wiring hole is simply a channel in the table pedestal in which the customer's own wires, electrical and power cables can be run. The wiring hole is covered by a removable 2" diameter cap.
  • Wiring in Pedestal. When the table design includes a pedestal, the wiring grommet or pop-up box will be centered over the pedestal, concealing wires, electrical and power cables within for a seamless, professional appearance. Many conference rooms include a power outlet in the floor under the table pedestal, making power cables and electrical wires completely invisible.
  • Wiring Column. If the table design does not feature a pedestal, a wiring column is placed between leg plates to conceal wires, electrical and power cables. Click here for photo of a wiring column in an Axis conference table.