Conference Table Power: Wiring Trough

| No Comments

detail_crescentfrostedsilve.jpg

Option: Wiring Trough with Sliding Covers. Our wiring trough option is available for the Crescent or Vector series only. A double rail system is used through the center of the conference table to support the top. The rails incorporate a track system that guides sliding covers. These covers can be finished in Brushed Aluminum, Powder-coated or veneered with Wood. Covers slide open to expose wiring plates that can be fitted with a variety of power and data jacks. There are fixed covers between the sliding ones that hide the top of the wiring trough. Wires are fed through the pedestal and hardwired to the electrical plates. The trough can be used as a raceway to run wires between pedestals, so that it is possible to feed wires up through only 1 location.
Wiring plates can be specified with 1, 2 or 3 duplex power outlets. Data outlets are fitted in 3 or 4 removable inserts per plate. The inserts can house duplex data jacks (cat.5 rj45 as standard) or a variety of other outlets including VGA, audio, etc.

Alternate Wiring Options. Several flip-top style wiring modules are available, and can be incorporated into any of our conference tables. Occasionally a client will specify a particular module from a different vendor and we work with them to fit it in our tables. These modules often have a small lip on the top that is designed to set on the top of the table surface.

Leave a comment

About this Entry

This page contains a single entry by Stoneline Designs published on September 22, 2011 2:05 PM.

Conference Table Design: Seating was the previous entry in this blog.

Five Conference Room Mistakes is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.

Pages