Metal Office Furniture Care and Maintenance

AxisSteelFrostedGlassDetail-1.jpg

Metal is a hard, durable material, and furniture made of metal typically requires far less maintenance than wood. Use these tips to get the most from your metal furniture.

Brushed Steel
Brushed Steel leg plates are finished with a Hand rubbed Oil finish and sealed with a Clear Satin Conversion Varnish finish. With normal use the finish and sealer should never need to be reapplied. Brushed Steel is subject to corrosion, therefore we do not recommend outdoor use in coastal areas, or exposure to rain. 


During processing at the mill, molten Steel is passed through rollers to flatten & shape the bar of Steel into a 1/2" inch thick plate. The rollers leave unpredictable character on the Steel surface, often in a linear pattern. We rub over and highlight this character with our regimented scratching, but each leg plate will retain the underlying character from the hot rolling process. The bottom of leg plates have a Cork barrier applied to protect floors. Stoneline uses Brushed Steel in the Axis and Radian table lines.

Stainless Steel
Stainless Steel panels are systematically brushed with a horizontal line pattern. As stainless Steel does not oxidize, no finish is necessary. However, both the Quadrant and Crescent table lines, which use Stainless Steel, also include wooden components. So we do not recommend locating these tables where they will be exposed to rain.

Aluminum
A cross-hatch pattern is hand scratched into the surface of 5/8" Aluminum plate. The scratch finish is on the pedestal part of the Vector table only. Solid Aluminum crossbars have a brushed texture and a Clear Satin Conversion Varnish finish. With normal use, the finish should never need to be reapplied. Aluminum is subject to corrosion from water, though not to the same degree as Brushed Steel. Therefore we do not recommend outdoor use in coastal areas, or exposure to rain. Stoneline uses Aluminum in the Vector table line.