Recently in Case Study Category

This modern conference table is from Stoneline Designs' Tangent line. It was custom built for a large church in Baltimore, Maryland.  The Tangent line combines a steel and aluminum base with either a glass or stone top.  This customer chose our beautiful Absolute Black Granite table top with 4 integrated data/wiring ports.

The elegant design of the conference table looks great with the clean lines of the room. We hope you enjoy the table for years to come.

See the table assembled below.


Watch below as the granite table top is installed onto its base.  The large granite table top is made from our Absolute Black Granite with a polished finish.  The Tangent Conference table is also available with a glass top. Press play to start.


Slideshow image

Before shipping a custom designed table, our artisans assemble the table and make any adjustments necessary to make sure all the parts fit together perfectly.

For this oval conference table with brushed steel base and granite top, the process took artisans Rob, Bart, Mace and Brian almost three hours. Now watch it happen in thirty seconds! Press "play" to begin the slide show:


Slideshow image

Custom Reception Desk

| No Comments | No TrackBacks
Stoneline recently completed a custom made Reception Desk for the Durham NC, Jewish Community Center.

JCCCornerDetailCCCropped.jpgSandblasted Steel, Oxidized Steel, Scratched & Stained Concrete panels, Scratched Glass and Jerusalem Gray Stone are  all combined in this large Reception Desk.   The Desk is designed for high traffic with several separate work stations.

JCCDetailcc.jpgVegetation was used as a resist on the Oxidized Steel panels, leaving an imprint of leaves, grass and flowers. This organic imagery softens a complex, architecturally varied structure.
Stoneline Designs recently completed this granite conference table for a law firm in Las Vegas, NV. 
The conference table, from our Crescent line, features a boat shaped top in polished absolute black granite. Power and data ports are hidden in a wiring channel with sliding covers along the center of the table. Stainless steel panels on the pedestal are removable for wiring access.

We recently created this granite dining table for a client in northern California:

8B9F.jpg 8BA1.jpg

The client has a beautiful modern home with a spacious feel. He chose a table from our Vector line, with simple, clean lines and a strong design to match his contemporary home design. The table features a polished absolute black granite top and a cherry pedestal. Here's what the client told us about his new table:

"The table is beyond beautiful. The design, engineering and construction are perfection. It is a work of art. I am more pleased than I could have imagined or anticipated."

Thanks so much for the photos; we love how you integrated the Vector table into your interior design. It's great to see our table in such a beautiful space!

Case Study: Credenza and Bookcase

| No Comments
Stoneline recently completed this credenza and bookcase for a private home in Asheville, NC. 
The pieces, from our Axis and Radian lines, both feature Anigre wood, cross-hatched brushed steel, and our "Scratched" glass. The bookcase and credenza work well with the client's art collection and modern design sense.

Here's what our client had to say when the first piece was delivered:

"I commend your crew. The delivery was quite professional and compact. We appreciated the phone call from Bart, zeroing in on the timing, as well as his complete and confident assembly of the unit. I guess that goes with being one of the craftsmen involved in construction. 

"That brings me to the piece itself. Absolutely beautiful, exactly what I had anticipated since I had visited your factory earlier and had seen some pieces first hand, fits into the decor of our home perfectly -- these are just a few of the expressions of satisfaction that Michael and I uttered after your crew left. I'm sure they were aware of how pleased we were, as we were oohing and ahhing the entire time they were here! A well-chosen piece,artfully designed, and constructed with quality and precision. I could go on and on. Thank you for creating this unit which we are proud and lucky to own. "

Thanks so much, it really means a lot to us. And thanks for the photos: we love seeing our pieces in such a beautiful home! 

Case Study: Bamboo Office Suite

| No Comments
Stoneline Designs recently completed this custom designed Bamboo Office Suite for a client in the Chicago area. 
The client wanted his home office to feature sustainable materials as much as possible. We adapted our Axis Office line for him, using rapidly renewable bamboo veneer over NAUF (no added urea formaldehyde) MDF substrate, with a water-based low VOC finish, to construct the drawer boxes. The leg plates are 33% recycled aluminum in our Bright finish, and the I-beam support rails are also 33% recycled aluminum with a powdered finish.

The office suite includes a desk and a 3-part credenza. The credenza was custom designed to fit the angled wall in the office space, with a lowered center which the client uses as a computer desk. The desk and credenza both have custom designed drawer boxes, and our Patterned "Scratched" Glass tops, with a bamboo veneer top in the center section of the credenza and custom arced ends on the two glass top pieces.

This detailed photo of the desk shows the Bright Aluminum texture on the leg plates, Patterned "Scratched" Glass top, and bamboo drawers.

Case Study: Glass Conference Table

| No Comments
We just received these photos of a conference table we designed for a client in Ohio. The client is an innovative environmental designer which specializes in changing people's behavior through the design of physical space. The conference table, from our Crescent line, features a boat shape top with our "Scratched" glass finish. The table was installed in a training facility designed by our client. We also provided several pieces of "Scratched" glass which were used to create signage and counters in the space.

It's great to see our table integrated into such a dramatic, colorful space. Thanks for the photos!

Case Study: Lectern

| No Comments
Stoneline Designs recently completed this lectern for CNN's "Inside CNN Studio Tour." The lectern is constructed of Stainless Steel panels riveted to a curved Black Ash form. Wiring and microphone access is concealed inside the pedestal. Click here for more information about this lectern.

Case Study: Bed

| No Comments
Stoneline recently completed this platform bed with built-in nightstand for a contemporary home.  

Designed in our Axis line, the bed includes steel I-beams and Maple wood for a modern look. 


Stoneline Designs recently completed this glass conference table for DuMOL Wines. DuMOL, an estate vineyard in California's Russian River Valley, wanted a distinctive table for their conference room. We custom designed a table in our Crescent line, with our patterned scratched glass finish for the top and integrated wiring. The wiring is concealed under round grommets for a seamless appearance when the table is not in use.

0091-Sigma7 12.jpg

Stoneline Designs completed this glass conference table for a professional workplace environment firm in Raleigh, North Carolina. The table, from our Crescent line, seats 14 and includes a wiring trough running down the center of the table to provide power and net access for laptops. A sliding cover conceals the wiring when not in use. Our "Patterned Scratched" Glass finish complements the open, spacious feel of the conference room.

5239 1-resized-600.jpg

Stoneline Designs recently completed this glass conference table for a high-tech professional services firm in the Washington DC area. The client required a table large enough to seat 12, with a sophisticated look. They chose our Crescent line of conference tables with a "scratched" glass top.

5239 2-resized-600.jpg


We custom designed this office furniture suite for a modern home office. The writing desk, credenza and hutch, all from the Axis line, feature brushed steel and dark wenge stained wood which looks good against the brick wall and hardwood floor. Our patterned "Scratched" glass finish adds a modern flair.


Stoneline Designs has just completed design and installation of a home office including computer desk and custom wall unit. The client needed modern furniture for a beautiful contemporary home in Austin TX. The room where the office was to be located includes a glass wall overlooking a garden. Such strong architectural design demands equally strong furniture design. So they turned to Stoneline.

The computer desk, from our Axis line of office furniture, includes a wiring channel to conceal cables running to the computer stored under the desk. The wall unit was custom designed for the space and to coordinate with the Axis desk.

Next time: more photos and a report on the project from our on-site installer.

Contact Stoneline for a quote on your next contemporary furniture project.


About this Archive

This page is an archive of recent entries in the Case Study category.

Brushed Steel is the previous category.

Conference Table Power is the next category.

Find recent content on the main index or look in the archives to find all content.