Pictured: CRESCENT Premium Race Track Conference Table, 42″x72″x29″h. Stained Cherry panels and custom Brushed Aluminum coves. Blue Frosted, Racetrack shape Glass top with a doubled rail system allowing center placement for a 4″d wiring grommet. A concave cove detail at the ends of the pedestals, contrasts with the curved S. Steel or Wood side panels. Single pedestals hold tops to 84×84″ in a variety of shape options.
On the Premium version of the Crescent Conference Line, a concave cove detail at the ends of the pedestals, contrasts with the curved S. Steel or Wood side panels for this conference table. Also on the Premium version of the Crescent Line is a Solid Aluminum Rail Structure compared to one of tubed Steel in our Standard version.
Single piece tops on single pedestals: 36-84″ x 36-84″ x 29″h
Single pedestals have concave Stainless Steel or optional Wood side panels for increased leg clearance. The finish on top of the pedestals coordinates with the concave coves on the ends, that separate the side panels. A Wood veneer finish is standard for the coves, with an up-charge for Blasted Steel or Brushed Aluminum. Many sizes and shapes are possible to 84×84″ including Round, Square, Oval, Hexagon, Octagon, Tri-Arced, Arced Ends or Racetrack.
Clear, Frosted (Green or Blue), Back-Painted (Silver or White) and "Scratched" glass tops are available with a Clear border ("Patterned") option. Clear & Diffused Glass tops expose the table structure whereas Back-painted Glass is opaque. Conference Tables tops to 30' in multiple pieces with a Blasted Aluminum T-bar between to stabilize and separate the sections from each other.
Stone tops have a Blasted or Hand-chiseled border. Options include Absolute Black Granite (Honed or Polished), Cleft Black Slate and Honed Jerusalem Limestone (Gray or Beige). Conference Tables to 30' in multiple pieces with a powder-coated T-bar between to stabilize and separate the sections from each other.
Brushed Stainless Steel panels are riveted to a curved form and are removable for wiring access. The unique horizontal Brush pattern is applied in long strokes that stretch the width of the panel and read as horizontal stripes. Concave end coves are finished in Blasted Steel or Wood veneers. A Solid Aluminum rail structure is Brushed except on the top which is Blasted for less reflectivity under Glass tops.
Cherry, Maple, Ash (Natural or Black), Bamboo and Anigre veneers. Custom staining available by request. Optional Wood panels are attached without exposed rivets so they are not removable for wiring access.
The hollow pedestals have removable Stainless Steel panels for interior access and can be placed over a floor outlet for seamless wiring integration. Our 4"d wiring grommet with a Brushed Aluminum cap has 2 power & 2 data outlets with a pass-through hole for an additional corded audio/visual jack. The support rails are doubled to allow a center placed grommet hole. Pass-through wiring holes at 3/4"d or 2"d for permanently placed speaker phones, etc.