CRESCENT Triangle shape Meeting Table

Pictured: Crescent triangle shape Meeting Table, 66x64x29″h. Three sided pedestal with Brushed Stainless Steel panels, Blasted Steel trim, Tube Steel rails and a Patterned Silver Back-painted Glass top with a Tri-arc shape and three- 4″d wiring grommets.

Concave S. Steel or Wood side panels contrast with a Wood or Blasted Steel trim detail at the ends of the pedestals. Single pedestals have 3 or 4 sides for smaller tables, and 5, 6 or 8 sides to increase the footprint on larger tops up to 9’d.
The hollow pedestal cavity is accessed behind the removable Stainless Steel panels for wiring access. An 8″d hole is provided through the bottom of the pedestal to allow placement over a floor outlet.


Size options: widths-36/42/48/54/60/66/72″ x lengths-to 108″ x height-29/30/40″h Tri-Arc shaped bases from 42″ to 66″ for Tri-Arc or Round tops

Standard sizes and shapes are included on our price list.

As each item is hand built to order, custom size and finish requests can be accommodated. Single pedestals have concave Stainless Steel panels for increased leg clearance (optional Wood side panels). The finish on top of the pedestals coordinates with the trim detail on the ends that separate the side panels, and can be specified as Wood Veneer or Blasted Steel. A tube Steel rail structure has integrated leveling for top height adjustment.

Many sizes and shapes are possible to 108×108″ with customized 3, 4, 6 and 8 sided pedestals. Tops can be Round, Square, Oval, Hexagon, Octagon, Tri-Arced, Arced Ends or Racetrack. Large tops are in multiple sections.


Clear, Frosted (Green or Blue), Back-Painted (Silver or White) and "Scratched" glass tops are available with a Clear border ("Patterned") option. Clear & Diffused Glass tops expose the table structure whereas Back-painted Glass is opaque. Conference Tables tops to 30' in multiple pieces with a Blasted Aluminum T-bar between to stabilize and separate the sections from each other.
Brushed Stainless Steel panels are riveted to a curved form and are removable for wiring access. The unique horizontal Brush pattern is applied in long strokes that stretch the width of the panel and read as horizontal stripes. Concave end coves are finished in Blasted Steel or Wood veneers. A Solid Aluminum rail structure is Brushed except on the top which is Blasted for less reflectivity under Glass tops.
Cherry, Maple, Walnut, Ash (Natural or Black) veneers or Blasted Steel. Trim finish is used on the tops of the pedestals and on the 1 1/14" wide strip at the ends of the pedestal that separates the S.Steel panels.

Blasted Steel is a matte Charcoal Gray color and offered only as a trim option (see trim).

Optional Wood panels instead of Stainless Steel are attached without exposed rivets so they are not removable for wiring access. Custom staining available by request for wood trim or panels.
4"d wiring grommets with a Brushed Aluminum cap have 2 power & 2 data outlets, and a pass-through hole for an additional corded audio/visual jack. Grommets can be placed in a pedestal, or between pedestals with a housing that mounts to the center rails.

Wiring troughs can be specified with Small, Medium or Large outlet plates that hold a combination of power and data jacks and are hidden under sliding covers. The Stone, Glass or Wood top is built in sections around the Brushed Aluminum trough. An optional Charcoal Gray powder coat finish is used with Black Granite tops. Wires run in the trough, or under the center rails between pedestals.

Pass-through wiring holes at 3/4"d or 2"d can be specified for permanently placed speaker phones, etc.

The hollow pedestals of the Crescent line have removable Stainless Steel panels for interior access and can be placed over a floor outlet for seamless wiring integration. The panels on an all Wood pedestal are not removable, so wires pass through the pedestal during installation.