CRESCENT Black Granite Meeting Table

Pictured: CRESCENT Black Granite Meeting Table. 36x78x29″h with Walnut Veneer Wood panels and Wood trim with Gray-painted Steel rails for an all-wood pedestal. Arced-ends finish the one-piece Honed Granite top with a hand-scored pattern and center wiring grommet.

The curved Wood or S. Steel side panels contrast with with the Wood or Steel trim detail at the ends of the pedestals. A gray painted tube Steel rail structure supports Stone or Glass tops to 7′ on a single pedestal. Larger sizes use multiple pedestals; up to 10′ with a single piece top. Larger Stone or Glass tops are built in multiple sections for Conference Tables to 30′. An optional 4″d wiring grommet, centered the table and allows a wide range of connectivity with an interchangeable data jack system and 2 power outlets.

Single piece tops: 42/48″ x 90/96/108/120″ x 29″h

Multiple piece tops: 42/48/54/60/72″ x 96/120/150/180/216″ x 29″h.

The pedestal’s curved side panels are standard in Stainless Steel with an up-charge for Wood veneer. The 1 1/4″ wide trim detail at the ends of the pedestals have a Wood veneer or Blasted Steel finish that coordinates with the finish on the top of the pedestal. An all Wood pedestal is possible by selecting both Wood side panels and trim. Many custom sizes and top shapes are offered including Rectangle, Boat, Racetrack, Oval , Tapered & Horseshoe.
Calculate pricing for the Simplified Crescent line. Select size and finish options are included in our Quick-ship program.

Clear, Frosted (Green or Blue), Back-Painted (Silver or White) and "Scratched" glass tops are available with a Clear border ("Patterned") option. Clear & Diffused Glass tops expose the table structure whereas Back-painted Glass is opaque. Conference Tables tops to 30' in multiple pieces with a Blasted Aluminum T-bar between to stabilize and separate the sections from each other.
Stone tops have a Blasted or Hand-chiseled border. Options include Absolute Black Granite (Honed or Polished), Cleft Black Slate and Honed Jerusalem Limestone (Gray or Beige). Conference Tables to 30' in multiple pieces with a powder-coated T-bar between to stabilize and separate the sections from each other.
Brushed Stainless Steel panels are riveted to a curved form and are removable for wiring access. The unique horizontal Brush pattern is applied in long strokes that stretch the width of the panel and read as horizontal stripes. Concave end coves are finished in Blasted Steel or Wood veneers. A Solid Aluminum rail structure is Brushed except on the top which is Blasted for less reflectivity under Glass tops.
Cherry, Maple, Ash (Natural or Black), Bamboo and Anigre veneers. Custom staining available by request. Optional Wood panels are attached without exposed rivets so they are not removable for wiring access.
4"d wiring grommets with a Brushed Aluminum cap have 2 power & 2 data outlets, and a pass-through hole for an additional corded audio/visual jack. Grommets can be placed in a pedestal, or between pedestals with a housing that mounts to the center rails.

Wiring troughs can be specified with Small, Medium or Large outlet plates that hold a combination of power and data jacks and are hidden under sliding covers. The Stone, Glass or Wood top is built in sections around the Brushed Aluminum trough. An optional Charcoal Gray powder coat finish is used with Black Granite tops. Wires run in the trough, or under the center rails between pedestals.

Pass-through wiring holes at 3/4"d or 2"d can be specified for permanently placed speaker phones, etc.

The hollow pedestals of the Crescent line have removable Stainless Steel panels for interior access and can be placed over a floor outlet for seamless wiring integration. The panels on an all Wood pedestal are not removable, so wires pass through the pedestal during installation.