Crescent Granite top Conference Table

Pictured: CRESCENT Glass Conference Table. 54x150x29″h with Brushed Stainless Steel panels, Black Ash trim and Gray painted Steel rails. Boat shape, Honed Absolute Black Granite top in 3 sections with 2- 4″d wiring Grommets.

The curved S. Steel or Wood side panels contrast with with the Wood or Blasted Steel trim detail at the ends of the pedestals. Multiple pedestals are joined by a Tube Steel rail structure to hold Stone or Glass tops in multiple sections for Conference Tables to 30′. The hollow pedestals have removable Stainless Steel panels for interior wiring access. Wiring channel is run under the center rails for connecting 2 or more pedestals from 1 feed location. 4″d wiring grommets have a Charcoal Gray spin-open cap with 2 power and 2 data jacks.

Standard sizes and shapes are included on our price list. (As each item is hand built to order, custom size and finish requests can be accommodated.)
* Single piece tops: widths-42/48/54″ x lengths-90/96/108/120″ x heights-29/30/40/42″h
* Multiple piece tops: widths-42/48/54/60/72″ x lengths-96/120/150/180/216″ x heights-29/30/40″h.
* Top shape options include Rectangle, Boat, Racetrack, Oval, Tapered, Octagon, Square, Circle & Horseshoe.

The pedestal’s curved side panels are Horizontal Brushed Stainless Steel as standard (optional- Wood veneer panels with horizontal grain orientation). The side trim detail that separates the curved panels, coordinates with the finish on top of the pedestals, and can be specified as Wood Veneer or Blasted Steel. A tube Steel rail structure has integrated leveling for top height adjustment. Rails connect multiple pedestals that are placed between seats, allowing a target of 30″ per chair.

Clear, Frosted (Green or Blue), Back-Painted (Silver or White) and "Scratched" glass tops are available with a Clear border ("Patterned") option. Clear & Diffused Glass tops expose the table structure whereas Back-painted Glass is opaque. Conference Tables tops to 30' in multiple pieces with a Blasted Aluminum T-bar between to stabilize and separate the sections from each other.
Brushed Stainless Steel panels are riveted to a curved form and are removable for wiring access. The unique horizontal Brush pattern is applied in long strokes that stretch the width of the panel and read as horizontal stripes. Concave end coves are finished in Blasted Steel or Wood veneers. A Solid Aluminum rail structure is Brushed except on the top which is Blasted for less reflectivity under Glass tops.
Cherry, Maple, Walnut, Ash (Natural or Black) veneers or Blasted Steel. Trim finish is used on the tops of the pedestals and on the 1 1/14" wide strip at the ends of the pedestal that separates the S.Steel panels.

Blasted Steel is a matte Charcoal Gray color and offered only as a trim option (see trim).

Optional Wood panels instead of Stainless Steel are attached without exposed rivets so they are not removable for wiring access. Custom staining available by request for wood trim or panels.
4"d wiring grommets with a Brushed Aluminum cap have 2 power & 2 data outlets, and a pass-through hole for an additional corded audio/visual jack. Grommets can be placed in a pedestal, or between pedestals with a housing that mounts to the center rails.

Wiring troughs can be specified with Small, Medium or Large outlet plates that hold a combination of power and data jacks and are hidden under sliding covers. The Stone, Glass or Wood top is built in sections around the Brushed Aluminum trough. An optional Charcoal Gray powder coat finish is used with Black Granite tops. Wires run in the trough, or under the center rails between pedestals.

Pass-through wiring holes at 3/4"d or 2"d can be specified for permanently placed speaker phones, etc.

The hollow pedestals of the Crescent line have removable Stainless Steel panels for interior access and can be placed over a floor outlet for seamless wiring integration. The panels on an all Wood pedestal are not removable, so wires pass through the pedestal during installation.