Pictured: CRESCENT Meeting Table 60″d x 29″h, with a 4″d wiring grommet, Brushed Stainless Steel panels, Black Ash trim and a Scratched Glass top.
Curved Stainless Steel or Wood side panels contrast with with the Wood or Blasted Steel trim detail at the ends of the pedestals. A wiring grommet option is integrated into the Steel rail system allowing center placement. Modern Round Conference Table with removable Stainless Steel skins for access to the pedestal interior. From a complete line of Desks, Credenzas, Meeting and Conference Tables to 30′ with multiple pedestals.
Single piece tops: 42/48″ x 90/96/108/120″ x 29″h
Multiple piece tops: 42/48/54/60/72″ x 96/120/150/180/216″ x 29″h.
The pedestal’s curved side panels are standard in Stainless Steel with an up-charge for Wood veneer. The 1 1/4″ wide trim detail at the ends of the pedestals have a Wood veneer or Blasted Steel finish that coordinates with the finish on the top of the pedestal. An all Wood pedestal is possible by selecting both Wood side panels and trim. Many custom size and top shapes are offered including Rectangle, Boat, Racetrack, Oval, Tapered & Horseshoe.
Wiring troughs can be specified with Small, Medium or Large outlet plates that hold a combination of power and data jacks and are hidden under sliding covers. The Stone, Glass or Wood top is built in sections around the Brushed Aluminum trough. An optional Charcoal Gray powder coat finish is used with Black Granite tops. Wires run in the trough, or under the center rails between pedestals.
Pass-through wiring holes at 3/4"d or 2"d can be specified for permanently placed speaker phones, etc.
The hollow pedestals of the Crescent line have removable Stainless Steel panels for interior access and can be placed over a floor outlet for seamless wiring integration. The panels on an all Wood pedestal are not removable, so wires pass through the pedestal during installation.