Crescent Octagon Shape Conference Table

Crescent Octagon Shape Conference Table, 10×2 x 102 x 29″h. Scratched Glass top in 4 sections with an open center and four- 4″ d wiring grommets. Stainless Steel panels with Walnut trim on an eight sided pedestal.
The Octagon shape pedestal with concave Stainless Steel panels incorporates a hollow center cavity that can be fit with a light to illuminate a logo or design. A fifth Glass section at 22.75″d covers the open cavity, and an optional printed vinyl logo.

The 8 sided top seats 12 comfortably with 30″ per chair. Clipped corners orient all Chairs toward the center and alleviates crowding at the corners of a Square shape top. A 96″d round version is available with a 3 piece top on a Hexagon shape base seating 9.

Single piece tops: 42/48″ x 90/96/108/120″ x 29″h

Multiple piece tops: 42/48/54/60/72″ x 96/120/150/180/216″ x 29″h.

The pedestal’s curved side panels are standard in Stainless Steel with an up-charge for Wood veneer. The 1 1/4″ wide trim detail at the ends of the pedestals have a Wood veneer or Blasted Steel finish that coordinates with the finish on the top of the pedestal. An all Wood pedestal is possible by selecting both Wood side panels and trim. Many custom sizes and top shapes are offered including Rectangle, Boat, Racetrack, Oval , Tapered & Horseshoe.

Clear, Frosted (Green or Blue), Back-Painted (Silver or White) and "Scratched" glass tops are available with a Clear border ("Patterned") option. Clear & Diffused Glass tops expose the table structure whereas Back-painted Glass is opaque. Conference Tables tops to 30' in multiple pieces with a Blasted Aluminum T-bar between to stabilize and separate the sections from each other.
Stone tops have a Blasted or Hand-chiseled border. Options include Absolute Black Granite (Honed or Polished), Cleft Black Slate and Honed Jerusalem Limestone (Gray or Beige). Conference Tables to 30' in multiple pieces with a powder-coated T-bar between to stabilize and separate the sections from each other.
Brushed Stainless Steel panels are riveted to a curved form and are removable for wiring access. The unique horizontal Brush pattern is applied in long strokes that stretch the width of the panel and read as horizontal stripes. Concave end coves are finished in Blasted Steel or Wood veneers. A Solid Aluminum rail structure is Brushed except on the top which is Blasted for less reflectivity under Glass tops.
Cherry, Maple, Ash (Natural or Black), Bamboo and Anigre veneers. Custom staining available by request. Optional Wood panels are attached without exposed rivets so they are not removable for wiring access.
4"d wiring grommets with a Brushed Aluminum cap have 2 power & 2 data outlets, and a pass-through hole for an additional corded audio/visual jack. Grommets can be placed in a pedestal, or between pedestals with a housing that mounts to the center rails.

Wiring troughs can be specified with Small, Medium or Large outlet plates that hold a combination of power and data jacks and are hidden under sliding covers. The Stone, Glass or Wood top is built in sections around the Brushed Aluminum trough. An optional Charcoal Gray powder coat finish is used with Black Granite tops. Wires run in the trough, or under the center rails between pedestals.

Pass-through wiring holes at 3/4"d or 2"d can be specified for permanently placed speaker phones, etc.

The hollow pedestals of the Crescent line have removable Stainless Steel panels for interior access and can be placed over a floor outlet for seamless wiring integration. The panels on an all Wood pedestal are not removable, so wires pass through the pedestal during installation.