Pictured: 13’x20’x29″h CRESCENT V shaped Conference Table. 7 pedestals with Brushed Stainless Steel panels & Cherry trim. The Patterned Scratched Glass top is in 5 sections at 30″ depth. Modesty panels on the long side are Cherry veneer and each pedestal houses a 4″d wiring grommet.
Curved S. Steel or Wood side panels have a wood trim detail separating panels at the ends of the pedestals. Multiple pedestals are joined by a Steel rail structure. Tops are in multiple sections for Stone or Glass top Conference Tables to 30′.
Let us customize to suit your space
The pedestal’s curved side panels are Horizontal Brushed Stainless Steel as standard (optional- Wood veneer panels with horizontal grain orientation). The side trim detail that separates the curved panels, coordinates with the finish on top of the pedestals, and can be specified as Wood Veneer or Blasted Steel. A tube Steel rail structure has integrated leveling for top height adjustment. Rails connect multiple pedestals that are placed between seats, allowing a target of 30″ per chair.
Wiring troughs can be specified with Small, Medium or Large outlet plates that hold a combination of power and data jacks and are hidden under sliding covers. The Stone, Glass or Wood top is built in sections around the Brushed Aluminum trough. An optional Charcoal Gray powder coat finish is used with Black Granite tops. Wires run in the trough, or under the center rails between pedestals.
Pass-through wiring holes at 3/4"d or 2"d can be specified for permanently placed speaker phones, etc.
The hollow pedestals of the Crescent line have removable Stainless Steel panels for interior access and can be placed over a floor outlet for seamless wiring integration. The panels on an all Wood pedestal are not removable, so wires pass through the pedestal during installation.