RADIAN Large Round Conference Table

Pictured: Radian 3 Ring, large Round Conference Table, 12’d x 29″h.  Radian style, Buffed Steel legs, placed at each chair, double as modesty panels. 5 piece, Clear Glass top, seating 15 with 5 wiring grommets.

The angled legs are tied together with the open air truss to support cantilevered Glass sections. The top rails have integrated Glass levelers and wiring grommet housings.  The 1/2″x10″ plate Steel or Aluminum legs are textured with our full range of brush patterns. 4″d wiring grommets have 2 power & 2 data outlets each. Wires run through the rings to a wiring column mounted to one leg. The 5 piece top with arcs on the inside of each Glass section make a softened, 5 pointed, open center shape. The open air truss provides structural strength, and it is formed by the 3 tube Aluminum rings, tied together with struts, legs and top rails.

Available from 10’d to 18’d, with large round Stone, Wood or Glass Conference Table tops.

Leg plates are 1/2″ thick, solid Aluminum or Steel plate, textured on both sides with a variety of finish options. Glass or Stone tops are in 3 sections at 10’d seating 12, 5 sections at 12’d & 15’d seating 15 & 20, 6 sections at 18’d seating 24.

Clear, Frosted (Green or Blue), Back-Painted (Silver or White) and "Scratched" glass tops are available with a Clear border ("Patterned") option. Clear & Diffused Glass tops expose the table structure whereas Back-painted Glass is opaque. Glass Conference Tables to 30' in multiple pieces with a Blasted Steel T-bar between to stabilize and separate the sections from each other.
Stone tops have a Blasted or Hand-chiseled border. Options include Absolute Black Granite (Honed or Polished), Cleft Black Slate and Honed Jerusalem Limestone (Gray or Beige). Stone Conference Tables to 30' in multiple pieces with a powder-coated T-bar between to stabilize and separate the sections from each other.
The double rail system has a Blasted finish while 1/2" plate Steel legs are textured with a variety of Brush patterns and sealed with a clear Lacquer. Leg plate finish textures include: "Cross-hatch Brushed", "Light Cross-hatch Brushed","Horizontal Brushed" or "Buffed" (pictured) texture. A regimented brush pattern exposes the random mill finish pressed into molten steel during the "Hot Rolled" fabrication process.
4"d wiring grommets have 2 power & 2 data outlets with a pass-though hole for additional corded audio/visual jacks. They are fitted in the end of a Blasted Steel wiring column that extends down to become a structural element, linking the radiating legs. The column is held 3/4" above the floor to sit over a floor outlet. An optional wire chase runs between pedestals and a 4"d grommet housing can be added between pedestals if needed. Pass-through wiring holes at 3/4"d or 2"d for permanently placed speaker phones, etc.