Tangent Stand Up Conference Table

Home / Office Furniture / Conference Room Tables / Multiple Pedestals (Large) / Tangent Stand Up Conference Table

Download Tangent Brochure Request Tangent Pricing

Pictured: TANGENT Stand Up height Conference Table, 48x150x40″h” with 2 pedestals, center wiring trough and a 6 piece Rectangle- Staggered shape top, in White Oak with a 2 tone stain- Light Gray contrasted with Charcoal Gray. The sectional top wraps around the center trough and the breaks between sections are accentuated by 1/4″ Aluminum dividers. The small offset end section can be either a contrasting or matching wood tone that is turned so that the grain pattern runs counter to the long top sections with a linear grain pattern. A 2 1/2″ wide beveled edge on the long top sections, dies into a square edge detail on the end sections as a simple detail that animates the staggered top layout.
Blasted & Black Powder-coated Steel pedestals with integrated wiring have optional rectangular base plates, that are increased in width for stability at standing height. Tube Aluminum Side Supports flank a blasted Steel column that feeds wires to the trough. The multiple piece top is supported by 4 Gray lacquered Steel rails with adjustable levelers.
Seated or Stand up Conference tables from 8 to 30′ are supported by multiple pedestals with many top and finish options.

Pictured: TANGENT Console, 18x60x34″h with Tube Aluminum side supports and a Green Frosted Glass top. See TANGENT Console Table Product Page.

Pricing: Starts at $8370 for a Stand-up height TANGENT Conference Table, 48x150x40″h, Brushed Tube Aluminum Side Supports, and a 3 piece Rectangle shape, Blue or Green Frosted Glass top and without wiring.

Standup height conference tables and modern boardroom tables with wood, Stone or Glass tops. Custom Stand up boardroom tables with integrated wiring. Custom Conference table with a center wiring trough for sale.

Single pedestals: Square or round tops from 42″ to 60″ in 6″ increments, 29″h

Multiple pedestals: 36/42/48/54/60/72″ x 90/96/120/150/180/216/240″ x 29″h

An elongated, Oval shape base plate with a Black powder-coated finish has floor levelers underneath. The base plate is bolted to a contrasting Blasted Steel column assembly that doubles as a wiring chase. There are 2 Brushed Aluminum side supports that flank the 4″ square central column. Gray lacquered Steel rails with integrated top levelers are bolted to a Blasted Steel, Oval top shape that caps the column and side supports.

Pricing as pictured $11817 Tangent Conference Table 48x150x40″h” with 2 pedestals (tube Alum. Side Supports), center wiring trough (2 medium outlet stations) and a 6 piece stained Wood veneer top (Rectangle- Staggered shape).

Patterned Scratched Glass- Double Blast
Clear, Frosted (Green or Blue), Back-Painted (Silver or White) and "Scratched" Glass tops are available with a Clear border ("Patterned") option. Clear & Diffused Glass tops expose the table structure whereas Back-painted Glass is opaque. Glass Conference Tables to 30' in multiple pieces with a Blasted Aluminum T-bar between to stabilize and separate the sections from each other. Shape options include Round, Square, "Scround", Rectangle, Oval, Boat or Racetrack.
Cleft Black Slate table top Jerusalem Grey Stone table top
Stone tops have a Blasted or Hand-chiseled border. Options include Absolute Black Granite (Honed or Polished), Cleft Black Slate and Honed Jerusalem Limestone (Gray or Beige). Stone Conference Tables to 30' in multiple pieces with a powder-coated T-bar between to stabilize and separate the sections from each other. Shape options include Round, Square, "Scround", Rectangle, Oval, Boat or Racetrack.
Pedestals combine Blasted Steel with Brushed Aluminum side supports on a Black powder-coated base plate. These contrasting materials form a stable structure that appears light and open, yet is strong enough to support 3/4" thick Stone or Glass tops. Single pedestals 54"d are standard without the Brushed Aluminum side supports, although they can be added as an option. The Steel rail structure is painted Gray to read as Aluminum under diffused Glass.
The pedestal bases have a 7"d x 1"h recess under the base designed to be placed over a floor outlet for seamless wiring integration. The top of the 4" square wiring column houses a powered grommet with a Brushed Aluminum cap. 4"d wiring grommets have 2 power & 2 data outlets with a pass-through hole for an additional corded audio/visual jack. Wires run under the center rails between pedestals and a 4"d grommet housing can be added between pedestals if needed. Pass-through wiring holes at 3/4"d or 2"d for permanently placed speaker phones, etc.